Advertisement
Notes and Precautions
•
Disconnect power before connecting or disconnecting wires in the case.
•
After connecting power, allow 1 hour for warm-up before testing. Allow 24 hours for warm-up before continued use.
•
Keep the instrument dry.
•
Do not drop the instrument or subject it to continuous vibration.
•
Do not store or use the instrument in areas with high levels of dust.
•
Do not clean the instrument with cleaning chemicals or solvents. If necessary, wipe clean with a damp cloth.
•
Do not operate the instrument in environments with combustible gases and materials.
•
Call a qualified electrician if you have any questions regarding electrical wiring codes.
Service and Maintenance
•
Tampering with the unit or attempting repairs will void the warranty. Repairs should only be performed by Ozone Solutions or an
Ozone Solutions authorized service representative.
•
Instruments with problems during the warranty period should be returned as a system to the factory or authorized service representative
for diagnosis and repair.
•
We recommend checking the calibration monthly and changing the user replaceable sensor annually. It is generally more cost effective to
replace sensors than to recalibrate them.
•
Always remove power from the ES-600 and SM-module before opening the case. Follow the Wiring Diagram in Appendix A.
This product is warranted against defects in materials and workmanship for one year following the date of purchase by the original owner. This
warranty does not include damage to the product that results from misuse, accident, dropping, modifications or alterations, and it does not
apply if the instructions in this manual are not followed, or if the unit is otherwise used outside its intended specifications.
If a defect develops during the warranty period, Ozone Solutions, in its sole discretion, will repair the instrument or replace it with a new or
reconditioned model of equivalent quality. In the event of replacement with a new or reconditioned instrument, the replacement unit will
continue the warranty of the original unit.
If the product should become defective during the warranty period, please return it through your distributor, or call Ozone Solutions at (888)
892-0303 or e-mail at sales@ozonesolutions.com to receive return instructions and a Return Materials Authorization (RMA) number.
Except as provided herein, Ozone Solutions makes no warranties, express or implied, including warranties of merchantability and fitness for a
particular purpose. Ozone Solutions shall not be liable for loss of use of this instrument or other incidental or consequential damages,
expenses or economic loss, or claims for such damage or economic loss.
Ozone Solutions is a registered trademark of Ozone Solutions, Division of KWJ Engineering, Inc.
© Ozone Solutions, Division of KWJ Engineering, Inc. 2013.
For brochures, application and tech notes, and other useful information, visit our extensive website at www.ecosensors.com. E-mail us at
sales@ozonesolutions.com.
Ozone Solutions
sales@ozonesolutions.com
(888) 892‐0303
Warranty
RECORD YOUR SERIAL NUMBER HERE
KEEP THIS MANUAL AND WARRANTY FOR YOUR RECORDS.
Ozone Controller, Model ES-600
User Manual, Rev. 1.0
5
Advertisement
