JNH MG417HB Assembly Instruction Manual

Hide thumbs

page of 18

/ 18
Bookmarks

Quick Links

Download this manual

A STEP-BY-STEP GUIDE

TO ASSEMBLE YOUR INFRARED SAUNA

Please read these instructions before assembling

your infrared sauna for the first time. We recommend

keeping this instruction manual for future

reference.

Version 3.12.18

Table of Contents

Need help?

Do you have a question about the MG417HB and is the answer not in the manual?

Questions and answers

Summary of Contents for JNH MG417HB

Page 1 A STEP-BY-STEP GUIDE TO ASSEMBLE YOUR INFRARED SAUNA Please read these instructions before assembling your infrared sauna for the first time. We recommend keeping this instruction manual for future reference. Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...
Page 4 6 x 15 Screw Door Hinge Latch Magnet Cable for Mp3 Player Power Supply 4 x 10 Internal Rope Thread Control Panel Mp3 Auxiliary Jack Panel Chromo Light Socket Control Panel Wood Frame Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...
Page 5 PURPOSE PMW4*16 For Power Box (27) TM4*40 For Heater (28) KA3*16 For Seat Bench (24) For Seat Bench (23) KA4*40 For Roof Panel (29) Questions on Installation? Contact (800) 528-3110. Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...
Page 6 Your Sauna will arrive in 3 boxes: What is included in each box: Box 1: BOTTOM PANEL TOP PANEL (Bird’s-eye View) USE Copper Wrie Only Hardware Packs POWER BOX Power Box Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...
Page 10 Step-By-Step Assembly Instructions for MG417HB/MG417RB: Place the bottom panel on dry and level ground. BOTTOM PANEL (In Box 1) Attach the rear panel to the bottom panel using the tongue and groove. Confirm there are no gap prior to latching.
Page 11 Attach the right panel to the rear and bottom panels using the tongue and groove. Confirm there is no gap prior to latching. RIGHT PANEL (In Box 3) RIGHT PANEL REAR PANEL (RIGHT VIEW) BOTTOM PANEL Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...
Page 12: Pmw4*16
Connect heater cords to power box. Fasten with two (2) TM4*40 REAR PANEL screws. Feed the power cord as shown: HEATER (In Box 1) USE Copper Wrie Only TM4*40 BOTTOM PANEL Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...
Page 13: Tm4*40
Attach a heater to the bench support panel. Fasten with two (2) TM4*40 screws. Short Cord HEATER (In Box 1) BENCH SUPPORT PANEL (In Box 1) TM4*40 BENCH SUPPORT PANEL Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...
Page 14: Ka3*16
Right Panel Rear Panel Bench Panel KA3*16 Bench Panel (In Box 1) Bench Support Panel Left View (The left panel is hidden) Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...
Page 15 Attach the front panel to the unit and secure with latches. Left Panel Front Panel (In Box 2) Rear Panel (Left View) ⑫ Use the screwdriver to remove the glass protectors on the glass panel. Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...
Page 16 The clearance distance of L1, L2, L3 and L4 should all be the same. REAR PANEL REAR PANEL TOP PANEL RIGHT PANEL TOP PANEL LEFT PANEL TOP PANEL (Bird’s-eye View of Sauna) FRONT PANEL Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...
Page 17 Install door knob (place inside of the sauna, tighten with ⑯ LONG SCREW) and door handle (place outside of sauna, tighten with SHORT SCREW). LONG SCREW Inside Outside SHORT SCREW Version 3.12.18 Copyright © 2018 JNH Lifestyles All Rights Reserved...

This manual is also suitable for:

Mg417rb

JNH MG417HB Assembly Instruction Manual

Quick Links

Need help?

Questions and answers

Related Manuals for JNH MG417HB

Summary of Contents for JNH MG417HB

Page 12: Pmw4*16

Page 13: Tm4*40

Page 14: Ka3*16

This manual is also suitable for: