Setting Up Qubii Duo (The Product) - maktar Qubii Duo User Manual

Setting up Qubii Duo (the product)

1. Insert your microSD card into Qubii Duo's microSD card
slot.
We recommend a microSD card with a capacity that is
greater than that of your smartphone or iPad. If the microSD
card's capacity is lower than your device, it's also ok! Qubii
Duo can still support it. When the card is full, Qubii Duo will
display a pop-up message telling you to switch the microSD
card. Once switched, the backup will start from where it left
off.
Keep in mind that Qubii Duo will format your microSD card
from FAT32 to exFAT automatically if your microSD card
capacity is 32GB or 64GB. The exFAT file system was
released by Microsoft to address FAT32's inability to carry
files over 4GB.
2. Connect Qubii Duo's USB port to your USB power
adaptor.
Please pay attention the type of the charger you have.
3. Connect your charging cable to Qubii Duo and your
device.
4. Connect your power adaptor and Qubii Duo to a power
outlet.
Qubii Duo
User Manual 9