Advertisement
Figure 3
7.
Insert dowels through the end side tapes of TN10NP Tennis Net (D).
8. Square up TN10NP Tennis Net (D) to each post, use Lacing Cord (U) to secure TN10NP Tennis Net (D) to each
post. See Figure 5.
9. Attach TN10CS Center Court Hold Down Strap (T) to the strap retaining bar on the TN10P Center Strap Anchor (S).
Adjust TN10CS Center Court Hold Down Strap (T) so top of TN10NP Tennis Net (D) measures 36" at the center.
See Figure 4.
10. After the net is at the desired height and tension make sure the Stabilizer Legs (G) are fully contacting the
playing surface then tighten all of the 5/16" X 3/4" Button Head Bolts (I). See Figure 2.
11. Using the 1/2" X 7 1/2" Hex Bolt (K) and the 1/2" Lock Nut (L) bolt two Wheels (J) onto each Stabilizer Leg (G).
Make sure Wheels (J) are installed on the same side of the posts. See Figures 2 & 7.
Figure 5
3
Figure 4
Figure 6
Advertisement
