Snailax SL-598 Use & Care Manual page 3

Setup and Opera�on
1. Please put the product on the flat floor.
2. Connect the adapter cable to the corresponding port on the foot massager.
3. Plug the home adapter into electrical outlet ( the adapter is safe to use with
both 110-120V & 220-240V )
4. Turn on the massage device through opera�ng control panel (See below instruc�ons)
• This device will switch off automa�cally a�er 15 minutes �mer run out.
• Do not setup or use the device in a bathroom or similary wet / damp areas.
Press to change the mode
between M1-M3 and the
corresponding indicator
lights up
Pressure Intensity Bu�on
Press to choose Low/Medium/High
Intensity of PRESSURE or turn Off
PRESSURE func�on
Low - 1 Indicator light up
Medium -2 Indicators light up
High - 3 Indicators light up
Note:
Press ON/OFF bu�on to turn on the massager and ac�vate the default se�ng, the device works on
Mode I,the PRESSURE massage on Medium level,SHIATSU on Medium speed and HEAT on high level.
On Mode I: Can not turn off both SHIATSU and PRESSURE func�on.
On Mode II : Can not turn off SHIATSU func�on.
On Mode III: Can not turn off PRESSURE func�on
Mode Bu�on
On/Off Bu�on
Press to turn on /off the device
Shiatsu Bu�on
Press to choose Low/Medium/
High Speed of SHIATSU or
turn off SHIATSU
Heat Bu�on
Press to turn on HEAT func�on and
choose Low/High heat level or turn
off the HEAT
High - Indicator turns red
Low - Indicator turns dark red
3