Quick Start
Quick Start
Charge Indicator
Battery Lock
1
14
Charge the battery pack (p. 20).
1
Charge the battery pack using the supplied
battery charger. The charging is complete
when the charge indicator turns from red to
green.
Install the battery pack (p. 23).
2
• Slide the SD card slot/battery cover open
2
• Align the arrows on the battery pack and
Install the SD card and close the SD
3
card slot/battery cover (p. 25).
• Insert the SD card as shown on the inside
• Do not touch or allow metal objects to
Front
Slide the mode switch to
4
(Shooting) (p. 34).
Turn on the power (p. 32).
5
The indicator blinks green, then shuts off.
and press the battery lock while you insert
the battery pack.
on the camera to correctly insert the
battery pack.
of the battery cover until you hear it click
into place.
contact the terminals on the back of the
SD card.