Canon Powershot S60 User Manual page 162

maintain the image quality while making changes.
*
As measured by Canon's testing standard.
**
The bundled software can be used to open or adjust
the parameters of images recorded in the RAW file
format. Please consult the Software Starter Guide for
details.
Tip for Using the Self-timer (p. 53)
Normally, the camera shakes a little when you press
the shutter button.
Setting the self-timer to
for two seconds and allows the camera to stop
shaking, thus preventing a blurred image.
Even better results can be obtained by placing the
camera on a stable surface or by using a tripod to
shoot.
Histogram Function (p. 27)
The histogram is a graph that allows you to judge the
brightness of the shot image. The greater the bias
toward the left in the graph, the darker the image.
The greater the bias toward the right, the brighter the
image. If the image is too dark, adjust the exposure
compensation to a positive value. Similarly, adjust
the exposure compensation to a negative value if the
160 Appendix
delays the shutter release
image is too bright (p. 80).
Dark Image Balanced
Image
Managing Image Files (p. 112)
About File and Folder Numbers
Images are assigned file numbers from 0001 to
9900, and folders are assigned folder numbers from
100 to 998 (Folder numbers cannot contain 99 in the
last two digits).
DCIM DCIM
100 CANON
101 CANON
198 CANON
Folder numbers cannot contain 99 in the last two digits.
200 CANON
Bright Image
0001 0002 0099 0100
0101 0102 0199 0200
9801 9802 9899 9900
0001 0002 0099 0100