separately) to power the camera when
connecting to a computer (p. 14, p. 147).
All procedures performed with a connection to
a USB 2.0 compliant board are not
guaranteed.
1
Install the driver and the software
applications bundled on the Canon
Digital Camera Solution Disk.
Please see the Software Starter Guide for the
installation procedures.
2
Use the supplied interface cable to
connect the computer's USB port to
the camera's DIGITAL terminal.
USB port
Interface cable
Windows
3
Proceed to steps
and
Macintosh
Refer to the Software Starter Guide and
download images.
DIGITAL Terminal
1. Open the terminal cover
with your finger nail.
2. Insert the connector until it
clicks.
Always grasp the
connector to remove the
USB cable from the
camera's DIGITAL
terminal.
4
below.
9. Additional Features
119