GAME FEATURES BREAK THE BANK™ is an electronic coin operated BREAK THE BANK™ is a new and exciting “Coin Roll amusement game designed to be played by one or two Down” game. The unique shape of the game makes this players.
DEPARTMENT BEFORE PROCEEDING AT: 3. Pushing the Advance button will advance you through the settings for the mode you are in. I.C.E. SERVICE DEPARTMENT 4. To exit and save your new settings, press the Pro- 716-759-0360 gram button once. You will now be in the normal NORMAL BUSINESS HOURS ARE: game play mode.
Page 5
PROGRAMMING PROGRAMMING 5. Insert your coin or token of choice. This section will discuss setting up the coin selectors. In order for the coin selectors to work properly, a “sample” of the coin or token that will be used for playing the game, must be placed in the optical comparator of each coin selector.
QUICK TROUBLESHOOTING PROBLEM PROBABLE CAUSE SOLUTION NO POWER BAD FUSE AT POWER MODULE INSPECT MAIN FUSES GAME UNPLUGGED CHECK POWER CORD TRIPPED CIRCUIT BREAKER CHECK BREAKER BOX DAMAGED POWER CORD REPLACE CORD GAME WILL NOT TAKE COINS / NO COIN / TOKEN IN COIN COMPARITOR INSERT COIN / TOKEN BEING USED TOKENS BAD HARNESSING OR CONNECTOR...
MONDAY – FRIDAY, 9:00 AM TO 6:00 PM EST LIGHT BULB REPLACEMENT WARNING: TURN OFF THE GAME POWER BEFORE REPLACING LIGHT BULBS “BREAK THE BANK” MARQUEE LIGHTS PRIZE WHEEL LIGHTS • Remove the “Bank Front” cover from the game by •...
Page 8
MAINTENANCE & TROUBLESHOOTING CLEANING Regular cleaning of the game will keep it looking new and greatly enhance its appeal. Clean the glass portions of your BREAK THE BANK™ with a standard window cleaner such as Windex®. Clean the cabinet sides with a good cleaner such as Fantastik®...
IF YOU HAVE ANY QUESTIONS REGARDING REPAIR the fuses with the same type and value. AFTER READING THIS SECTION, CALL OUR SERVICE DEPARTMENT BEFORE PROCEEDING AT: I.C.E. SERVICE DEPARTMENT 716-759-0360 NORMAL BUSINESS HOURS ARE: MONDAY – FRIDAY, 9:00 AM TO 6:00 PM EST...
Page 10
MAINTENANCE & TROUBLESHOOTING • BALLAST Remove the Opto Sensor PC Board by unscrewing the 2 white spacers. Replace the Opto Sensor PC • Remove the rear panel from the game. Unscrew the Board and reassemble in reverse order. ballast and unplug the wire harness. Replace the bal- last “.
Page 11
OVERVIEW IF YOU HAVE ANY QUESTIONS REGARDING REPAIR AFTER READING THIS SECTION, CALL OUR SERVICE DEPARTMENT BEFORE PROCEEDING AT: I.C.E. SERVICE DEPARTMENT 716-759-0360 NORMAL BUSINESS HOURS ARE: MONDAY – FRIDAY, 9:00 AM TO 6:00 PM EST...
Need help?
Do you have a question about the BREAK THE BANK and is the answer not in the manual?
Questions and answers