Advertisement
Quick Links
QUIC-RELEASE
Model QR-FEH-1-_
Parts and Instruction Manual
QR-FEH-1-A
QR-FEH-1-B
QR-FEH-1-K
QR-FEH-1-S
ITEM NO.
1
2
3
4
5
6
7
9
10
11
Fire Extinguisher Holder - 5 lb.
®
MODEL
For use w/ Amerex B402 & B500
For use w/ Badger 5MB-6HB
For use w/ Kidde Pro Series 340
For use w/ Sentry AA05S-1
PART NO.
3030-300-105
RETAINER BRACKET
3030-300-101
BASE BRACKET
3030-300-107
BAND CLAMP
3030-300-111
LABEL, MODEL QR-FEH-1-A
3030-310-111
LABEL, MODEL QR-FEH-1-K
3030-315-111
LABEL, MODEL QR-FEH-1-B
3030-320-111
LABEL, MODEL QR-FEH-1-S
3030-300-113
BAND CLAMP CAP
3030-300-117
RETAINING PIN / LANYARD ASSY
3030-300-119
LABEL, RETAINING PIN
3030-300-121
FOAM PAD, 3-3/4" x 1-1/4" x 1/4"
3030-300-123
FOAM PAD, 2-1/2" x 1/1/4" x 1/4"
3030-300-125
LABEL, DO NOT ADJUST
DESCRIPTION
DESCRIPTION
ZICO
3030PM25
Rev. 11-29-21
WT. /@
IN LBS.
2.45
2.45
2.45
2.45
QTY.
1
1
1
1
1
1
1
1
1
1
®
Advertisement
Related Manuals for Zico QUIC-RELEASE QR-FEH-1-S
Summary of Contents for Zico QUIC-RELEASE QR-FEH-1-S
- Page 1 ZICO ® QUIC-RELEASE Fire Extinguisher Holder - 5 lb. ® 3030PM25 Model QR-FEH-1-_ Parts and Instruction Manual Rev. 11-29-21 WT. /@ MODEL DESCRIPTION IN LBS. QR-FEH-1-A For use w/ Amerex B402 & B500 2.45 QR-FEH-1-B For use w/ Badger 5MB-6HB 2.45...
- Page 2 Attach Lanyard Assembly here. Lanyard Assembly tab serves as flat washer. Slide Retaining Pin through hole in Band Clamp latch to secure. Mount at four points with Grade 5, 1/4" Type 4 hardware. Note that two fasteners sets must go through the bottom holes of the Base Bracket and that two fastener sets must go through the shared holes of the Retainer Bracket and the...
- Page 3 TOLL FREE: 800-711-3473 10 West College Avenue, P.O. Box 337, Yardley, PA 19067-0587 • (215) 493-3618 • FAX: (215) 493-1401 Copyright Ziamatic Corp. 11-21 *ZICO is a registered trademark for fire, safety and marine products made by Ziamatic Corp. Page 3...