Advertisement
Quick Links
QUIC-RELEASE
Model QR-FEH-1-_
Parts and Instruction Manual
MODEL
QR-FEH-1-A
QR-FEH-1-B
QR-FEH-1-K
ITEM NO.
1
2
3
4
5
6
7
9
10
11
Fire Extinguisher Holder - 5 lb.
®
DESCRIPTION
For use w/ Amerex B500
For use w/ Badger 5MB-6HB
For use w/ Kidde Pro Series 340
PART NO.
3030-300-105 RETAINER BRACKET
3030-300-101 BASE BRACKET
3030-300-107 BAND CLAMP
3030-300-111 LABEL, MODEL QR-FEH-1-A
3030-315-111 LABEL, MODEL QR-FEH-1-B
303-310-111
LABEL, MODEL QR-FEH-1-K
3030-300-113 BAND CLAMP CAP
3030-300-117 RETAINING PIN / LANYARD ASSY
3030-300-119 LABEL, RETAINING PIN
3030-300-121 FOAM PAD, 3-3/4" x 1-1/4" x 1/4"
3030-300-123 FOAM PAD, 2-1/2" x 1/1/4" x 1/4"
3030-300-125 LABEL, DO NOT ADJUST
WT. /@
IN LBS.
DESCRIPTION
ZICO
3030PM25
Rev. 9-4-20
2.45
2.45
2.45
QTY.
1
1
1
1
1
1
1
1
1
1
®
Advertisement
Related Manuals for Zico QUIC-RELEASE QR-FEH-1 Series
Summary of Contents for Zico QUIC-RELEASE QR-FEH-1 Series
- Page 1 ZICO ® QUIC-RELEASE Fire Extinguisher Holder - 5 lb. ® 3030PM25 Model QR-FEH-1-_ Parts and Instruction Manual Rev. 9-4-20 WT. /@ MODEL DESCRIPTION IN LBS. QR-FEH-1-A For use w/ Amerex B500 2.45 QR-FEH-1-B For use w/ Badger 5MB-6HB 2.45 QR-FEH-1-K For use w/ Kidde Pro Series 340 2.45...
- Page 2 Attach Lanyard Assembly here. Lanyard Assembly tab serves as flat washer. Slide Retaining Pin through hole in Band Clamp latch to secure. Mount at four points with Grade 5, 1/4" Type 4 hardware. Note that two fasteners sets must go through the bottom holes of the Base Bracket and that two fastener sets must go through the shared holes of the Retainer Bracket and the...
- Page 3 TOLL FREE: 800-711-3473 10 West College Avenue, P.O. Box 337, Yardley, PA 19067-0587 • (215) 493-3618 • FAX: (215) 493-1401 Copyright Ziamatic Corp. 9-20 *ZICO is a registered trademark for fire, safety and marine products made by Ziamatic Corp. Page 3...