Initiating And Responding To Emergency; Alarm - RCA RDR2600V Instruction Manual

26
Prodigi
available only in digital mode.
Your radio supports 3 Emergency Alarms:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
Each alarm has the following default setting:
Disabled: Radio cannot transmit alarm signal,
but can receive alarm from other radios.
Each alarm has the following types:
Regular: Radio transmits an alarm signal and
shows audio and/or visual indicators.
Silent: Radio transmits an alarm signal without
any audio or visual indicators. There will be no
response (call) from the target radio until you
press the PTT button to initiate the call.
Silent with Voice: Radio transmits an alarm
signal and is able to receive an incoming call,
without any audio or visual indicators, until you
press the [PTT] button to initiate, or respond
to the call.
Initiating & Responding to Emergency
RDR2000 Series Professional Digital Two-Way Radio Instruction Manual
TM
Copyright © 2016 RCA Communications Systems

Alarm

1. To initiate an Emergency Alarm press the
programmed Emergency button. The LED
lights up solid red. The display (RDR2550
RDR2600 only) shows Sending Alarm,
TM
which alternates with your radio ID.
Emergency icon appears on the Home
screen display. When an Emergency Alarm
acknowledgment is received, an alert
tone sounds and the display (RDR2550
RDR2600 only) shows Emergency Alarm
TM
Successful. At this point depending on
the setting selected you can press the
[PTT] to talk or your radio's microphone
is automatically activated, allowing you to
communicate with the other radio without
pressing the [PTT] button.
2. To Respond to an Emergency Alarm Press
any button to stop all Emergency Alarm
received indications. Press [PTT] button to
initiate a call with the emergency initiating
radio.
/
TM
/
TM