Sony STR-DE445 Operating Instructions Manual page 23

1 3
? / 1
DIMMER
SPEAKERS
R ON r OFF
A
VIDEO
B
MD/TAPE
PHONES
7
3 INPUT MODE button
Press to select the input mode for your digital
components (DVD/LD and TV/SAT).
Each press switches the input mode of the currently
selected component.
Select
AUTO
DIGITAL (OPTICAL)
DIGITAL (COAXIAL)
ANALOG
4 5.1CH INPUT button
Press to enjoy the audio source connected to the 5.1CH
INPUT jacks with the video from the selected
component.
• When the 5.1CH INPUT is selected, the tone, bass booster,
and sound field effects do not function.
• To change the video input displayed when 5.1CH INPUT is
selected, press SET UP (ws) and then press cursor buttons
(w;) repeatedly to select "5.1 V. IN" (see page 47 for
details).
2 4
MULTI CHANNEL DECODING
DISPLAY
INPUT MODE
DVD/LD TV/SAT 5.1CH INPUT
CINEMA STUDIO
A B
CD TUNER AUX SOUND FIELD
A. F. D. 2CH
To
Give priority to digital signals
when there are both digital and
analog connections. If there are
no digital signals, analog is
selected
Specify the digital audio signals
input to the DIGITAL OPTICAL
input jacks
Specify the digital audio signals
input to the DIGITAL COAXIAL
input jacks (DVD/LD only)
Specify the analog audio signals
input to the AUDIO IN (L and R)
jacks
I i
+
–
LEVEL
SET UP
C
SUR
NAME
MODE
BASS/
TREBLE ENTER
5 MASTER VOLUME control
After turning on the component you selected, rotate to
adjust the volume.
6 MUTING button
Press to mute the sound. The indicator lights up when
the sound is muted.
7 SPEAKERS selector (STR-DE545 and STR-SE501 only)
Press according to the front speakers you want to
drive.
Press To select
A The speakers connected to the FRONT
SPEAKERS A terminals
B The speakers connected to the FRONT
SPEAKERS B terminals
A+B* The speakers connected to both the FRONT
SPEAKERS A and B terminals (parallel
connection)
* Be sure to connect the front speakers with nominal impedance of
8 ohms or higher if you want to select both sets of front speakers.
STR-DE445 only
Press SPEAKERS button to ON.
PHONES jack
Connects headphones.
• To use the headphones, press the SPEAKERS button to OFF
to output sound to the headphones.
• When listening to the headphones, set the sound field to
2CH to get the correct soundstage.
PRESET/
– PTY SELECT + SHIFT
– TUNING + MEMORY
BASS BOOST TONE
FM/AM FM MODE
MASTER VOLUME
RDS EON RDS PTY
BASS
MUTING
BOOST TONE
5 6
23 GB