Product Description ENGLISH Product Description The T-CITY waterproof lighting system is a perfect combination of design and technology. It is equipped with a multi-chip LED light source that can generate a powerful luminous flux and is enclosed in a completely waterproof structure featuring a borosilicate glass cover.
Symbol keys ENGLISH well-acquainted with Safety instructions safety instructions Each lighting device in the T-CITY ➢ CCEA, the manufacturer, waives series designed any responsibility in case of manufactured based on state-of- product tampering or improper the-art techniques. It is made of well-selected, high- quality materials.
Page 5
Safety Warnings ENGLISH explosion. It might cause severe body Danger caused by inappropriate injuries. spare parts. ➢ Do not install and use this Using inappropriate spare parts may product hazardous cause bodily injuries and material environments (high risk damages. ➢ Do not use spare parts that have explosion).
Symbol keys ENGLISH Levels of risk Risk levels ➢ Do repair disassemble equipment. Please apply qualified technicians for any issues. ➢ Any product tampering modifications not having been approved by the manufacturer will null and void the warranty . 2.3 Damage risk levels DANGER Dangers where noncompliance may immediately severe injuries and...
ENGLISH Available versions Available versions Please refer to the table hereunder listing all the lighting equipment, for you to identify the version you need and its main features, for you to have the lighting equipment correctly and efficiently installed and used. Note: The product code is found on the brand name label stuck on the product’s backside.
ENGLISH Installation 4.3 Installation Installation with TFX01 side- mounting brackets ATTENTION ➢ Hook the two side brackets on the lamp sides using the 2 The lamp fall-down may cause screws provided. damage to persons and objects ➢ Bore the fixing holes on the ➢...
Page 10
Installation Symbol keys ENGLISH ➢ The lamp position adjusted by rotating the same with respect to the standing surface once the two M3 screws on each side have been loosened. Once the right position is found, tighten both screws (see picture hereunder).
Collegamento elettrico Plug-in ENGLISH Plug-in NOTICE Material damages caused by liquid leakage ➢ Use a connector securing the Standard version: M12 4P Male same degree of protection as the connector A Coding (on the lamp) lamp, if not greater. Connection ➢...
Power cord Symbol keys ENGLISH 5.2 Pre-assembled Power Cord for M12 Lighting DESCRIPTION Cod. M12AFC5: M12 4 poles A Coding, connector female with pre-assembled UL PVC Cable, 4X0,75mmq. Cross- section. PICTURE.08 PIN connection conductor DC + (24VDC) brown Not connected white DC –...
➢ Carefully rinse the lamp surface been carried out correctly. with a mild cleanser and then wipe off using a soft cloth in Please contact CCEA’S Technical support order to avoid scoring it. service in case the lamp is defective CCEA Technical Support Service...
– to be carried defects or malfunctioning. out exclusively at/by CCEA Technical service dept. or by any CCEA’S official Product disposal dealer – are covered throughout the (EU Regulations) entire product’s lifetime. In view of...
ENGLISH Technical data and symbol keys Please apply to the council offices of your place of residence in order to know where the collection facilities are located. Technical data NOTE: Please refer to the data printed on the label or engraved on the lamp.
Symbol keys ENGLISH Symbol keys CE Conformity marking Protection class III device IP67 Degree of protection IP67 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov...
02374040240 hereby declares that the light equipment named TCITY – to which the present Declaration of Conformity is related - was manufactured by CCEA SRL in accordance with the following Directives: 2014/35/UE on Low Voltage Equipment Safety and the Directive of Electromagnetic Compatibility 89/336/CEE (EMC) 2014/30/UE.