Product Description ENGLISH Product Description ▪ Led Lighting Equipment suitable for small, medium and large-sized industrial machine tools, work benches other applications where a technical lighting solution required featuring: ▪ Anodized aluminum structure ▪ Tempered glass-front protection ▪ High power Led light source ▪...
ENGLISH well-acquainted with Safety instructions safety instructions Each lighting device in the ➢ CCEA, the manufacturer, waives CO.ALPHA series was designed any responsibility in case of and manufactured based on product tampering or improper state-of-the-art techniques. It is made of well-selected, high- quality materials.
Page 5
Safety Warnings ENGLISH explosion. It might cause severe body Danger caused by inappropriate injuries. spare parts. ➢ Do not install and use this Using inappropriate spare parts may product hazardous cause bodily injuries and material environments (high risk damages. ➢ Do not use spare parts that have explosion).
Symbol keys ENGLISH Levels of risk Risk levels ➢ Do repair disassemble equipment. Please apply qualified technicians for any issues. ➢ Any product tampering modifications not having been approved by the manufacturer will null and void the warranty . 2.3 Damage risk levels DANGER Dangers where noncompliance may immediately severe injuries and...
ENGLISH Available versions Available versions Please refer to the table hereunder listing all the lighting equipment, for you to identify the version you need and its main features, for you to have the lighting equipment correctly and efficiently installed and used. Note: The product code is found on the brand name label stuck on the product’s backside.
Guide to installation Symbol keys ENGLISH Guide to installation 4.1 Product sizes and accessories Model CA0121SXY 204 mm (8,03 in) CA0221SXY 354 mm (13,94 in) CA0321SXY 504 mm (19,84 in) CA0421SXY 654 mm (25,75 in) Picture.03 4.2 COMPACT.ALPHA side mounting brackets Picture.04 “CAFX01”...
ENGLISH Installation 4.3 Installation Installation with CAFX01 side- mounting brackets ATTENTION ➢ Hook the two side brackets on the lamp sides using the 2 The lamp fall-down may cause screws provided. damage to persons and objects ➢ Bore the fixing holes on the ➢...
Page 10
Installation Symbol keys ENGLISH Picture.06 NOTICE Damaged or broken lamp. ➢ When side mounting the lamp ensure never completely loosen the M3 screws allowing for lamp rotation, to avoid having the lamp fall down. ➢ The side fasteners must be checked on a regular basis and the M5 screws on the brackets tightened to the machine surface.
Collegamento elettrico Plug-in ENGLISH Plug-in NOTICE Material damages caused by liquid Picture.07 leakage ➢ Use a connector securing the Standard version: M12 4P Male same degree of protection as the connector A Coding (on the lamp) lamp, if not greater. Connection ➢...
Power cord Symbol keys ENGLISH 5.2 Pre-assembled Power Cord for M12 Lighting DESCRIPTION Cod. M12AFC5: M12 4 poles A Coding, 60VDC connector female with pre-assembled UL PVC Cable, 3G1mmq. Cross- section. PICTURE.08 PIN connection conductor DC + (24VDC) black1 Not connected DC –...
➢ Carefully rinse the lamp surface been carried out correctly. with a mild cleanser and then wipe off using a soft cloth in Please contact CCEA’S Technical support order to avoid scoring it. service in case the lamp is defective CCEA Technical Support Service...
– to be carried defects or malfunctioning. out exclusively at/by CCEA Technical service dept. or by any CCEA’S official Product disposal dealer – are covered throughout the (EU Regulations) entire product’s lifetime. In view of...
ENGLISH Technical data and symbol keys Please apply to the council offices of your place of residence in order to know where the collection facilities are located. Technical data NOTE: Please refer to the data printed on the label or engraved on the lamp.
Symbol keys ENGLISH Symbol keys CE Conformity marking Protection class III device IP67 Degree of protection IP67 UL 2108 STANDARD FOR LOW VOLTAGE LIGHTING SYSTEM – Edition 2 – Revision Date 2017/05/30 CSA C22.2 NO.9.0-96 LUMINAIRES – Edition 1 – Revision Date 1998/07/01.
02374040240 hereby declares that the light equipment named COMPACT.ALPHA – to which the present Declaration of Conformity is related - was manufactured by CCEA SRL in accordance with the following Directives: 2014/35/UE on Low Voltage Equipment Safety and the Directive of Electromagnetic Compatibility 89/336/CEE (EMC) 2014/30/UE.