Changing The Network Settings - Sony STR-DA6400ES Operating Instructions Manual

Changing the network
settings
You can change the network settings of the
receiver using the Network settings menu.
Configuring network settings
automatically
1
Press AMP.
The receiver can be operated using the
remote.
2
Press MENU.
The menu is displayed on the TV screen.
3
Press V/v repeatedly to select
" Settings," then press
b.
4
Press V/v repeatedly to select
"Network," then press
5
Press V/v repeatedly to select
"Network Setup," then press
6
Press V/v repeatedly to select
"Internet Setup," then press
7
Press V/v repeatedly to select
"Connect Automatically
(DHCP)," then press
AMP
"Success! Your device is now connected
to your network." appears on the TV
screen.
8
Press
Configuring network settings
manually
To set the IP address manually
V/v/b,
1
Press AMP.
The receiver can be operated using the
remote.
MENU
2
Press MENU.
The menu is displayed on the TV screen.
3
Press V/v repeatedly to select
" Settings," then press
4
Press V/v repeatedly to select
"Network," then press
5
Press V/v repeatedly to select
"Network Setup," then press
6
Press V/v repeatedly to select "Internet
Setup," then press
7
Press V/v repeatedly to select "Manual
Configuration," then press
The setting screen for the IP address
or
appears on the TV screen.
8
Press
The soft keyboard appears on the TV
screen.
or b.
.
.
to select "Finish."
.
to select the IP address.
continued
.
or b.
or b.
.
.
23 GB