Related Manuals for Uni-Art SP3290
Summary of Contents for Uni-Art SP3290
- Page 1 SP3290 900MHz Wireless Outdoor/Indoor Speakers System User’s Manual Please read before using the equipment...
- Page 2 INTRODUCTION This 900 MHz wireless speaker system uses latest wireless technology that enables you to enjoy music and TV sound anywhere inside or outside your home. You can simply connect the system to any audio source such as Radio, TV, VCR, Hi-Fi and CD/MP3/VCD/DVD player.
-
Page 3: Component Identification
COMPONENT IDENTIFICATION TRANSMITTER 1. Antenna Tube 2. Power LED 3. Signal LED 4. Audio Cord 5. CD Jack 6. Channel Selector SPEAKER RECEIVERS 7. Power LED 8. Power ON/OFF 9. Volume Up 10. Volume Down 11. Auto Scan 12. Ligth ON/OFF 13. -
Page 4: Installation
INSTALLATION TRANSMITTER 1. Insert the antenna tube into the antenna wire. 2. Connect the supplied AC/DC power adaptor to an electrical wall outlet. 3. Plug the AC/DC power adaptor in the DC jack located on the rear of the transmitter. 4. -
Page 5: Operation
2. Press POWER button and turn the speakers ON. The POWER LED will light up in blue. Switch off the speakers by pressing the POWER button on the speaker, and the LED will be off. OPERATION 1. Turn on the audio source (TV or audio component) to which the transmitter is connected with. - Page 6 NOTE : a). Keep a distance of the speaker up to 7 meters apart from the transmitter, and then press “AUTO SCAN” button for the best reception. b) Whenever you find frequency jam, move your channel switch from one channel to the other channel (there are two channels for selection) on the transmitter, and then press the “AUTO SCAN”...
- Page 7 TROUBLE SHOOTING NO SOUND Ensure the AC/DC adaptor is fully inserted into the AC outlet and the power connection input on the transmitter. Ensure the speaker is switch ON. Speaker’s battery capacity is too low, replace with new batteries or connect the AC/DC adaptors to the speakers.
-
Page 8: Technical Specifications
TECHNICAL SPECIFICATIONS Transmission Mode Carrier Frequency 900 MHz Operation Voltage Transmitter, DC 12V 200mA Speaker, 6 X ‘AA’ size Alkaline batteries or DC 9V 1A adaptor. Frequency Response 40Hz – 12KHz Distortion S/N Ratio 65dB (typical) Channel Separation 50dB (typical) Operation Distance Up to 50 meters (open area) Output Power...