Presetting Radio Stations - Sony STR-DA1500ES Operating Instructions Manual

Tuning into a station directly
(Direct Tuning)
Enter the frequency of a station directly by
using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use FM/AM on the receiver.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
4
Press ENTER or
You can also use MEMORY/ENTER on
the receiver.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.

Presetting radio stations

You can preset up to 30 FM stations and 30
AM stations. Then you can easily tune in the
stations you often listen to.
Numeric
buttons
V/v/B/b
.
1
2
3
,
Press TUNER repeatedly to
select the FM or AM band.
You can also use FM/AM on the receiver.
Tune in the station that you
want to preset using Auto
Tuning (page 28) or Direct
Tuning (page 29).
In case of poor FM stereo reception,
switch the FM reception mode (page 28).
Press MEMORY.
You can also use MEMORY/ENTER on
the receiver.
"MEMORY" lights up for a few seconds.
Perform steps 4 and 5 before
"MEMORY" goes out.
TUNER
AMP
MENU
MEMORY,
ENTER
PRESET
+/–
continued
GB
29