Settings For The Tuner (Tuner Menu); Settings For The System (System Menu) - Sony STR-DA1500ES Operating Instructions Manual

Settings for the tuner
(TUNER menu)
You can use the TUNER menu to set the FM
station receiving mode and to name preset
stations.
Select "3-TUNER" in the amplifier menus.
For details on adjusting the parameters, see
"Navigating through menus" (page 23) and
"Overview of the menus" (page 24).
TUNER menu parameters
x FM MODE (FM station receiving
mode)
• STEREO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
• MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
x NAME IN (Naming preset
stations)
Lets you set the name of preset stations. For
details, see "Naming preset stations" (page
30).
GB
26
Settings for the system
(SYSTEM menu)
You can use the SYSTEM menu to customize
the settings of the receiver.
Select "4-SYSTEM" in the amplifier menus.
For details on adjusting the parameters, see
"Navigating through menus" (page 23) and
"Overview of the menus" (page 24).
SYSTEM menu parameters
x NAME IN (Naming inputs)
Lets you set the name of inputs. For details,
see "Naming inputs" (page 22).
x DIMMER (Brightness of the
display)
Lets you adjust the brightness in 3 steps.
x 12V TRIG. (12V Trigger)
Lets you turn the receiver on/off in another
zone, or select various option for use of the
12V Trigger function.
• INPUT (for main zone only)
Lets you turn on the output of 12V triggers
when the preset input is selected.
When you select "INPUT", the setting
display which sets each input trigger to on/
off appears. Press V/v to select the input,
. Press V/v again to select
then press
"ON" or "OFF", then press
• ZONE
Lets you turn the output of 12V triggers on
or off based on whether the selected zone is
turned on or off.
• CTRL
Lets you turn the output of 12V triggers on
or off manually using the CIS command of
the IR remote.
• OFF
Lets you turn off output of 12V triggers even
when the main receiver is turned on.
.