Table of Contents
Advertisement
Available languages
Available languages
No beer is
The DraughtKeg
being
is empty.
dispensed.
There is no
DraughtKeg inside
the BeerTender®
appliance.
The BeerTender
appliance tap
handle is not
correctly
installed/positioned.
You cannot
The tap cover has
close the lid.
not been
positioned
correctly.
You cannot
The DraughtKeg
close the lid.
has not been
correctly installed.
The
The DraughtKeg
BeerTender
has not reached
appliance
the right
produces too
dispensing
much foam
temperature.
when
dispensing
beer.
The DraughtKeg
has been shaken.
The tap handle is
being moved too
slowly.
14
Replace the
TM
DraughtKeg with a
new one.
Install a
DraughtKeg inside
the BeerTender
appliance.
Install/position the
tap cover correctly.
Position the tap
cover correctly.
Install the tap
correctly. Ensure
the draught tube
has been installed
completely and is
not preventing the
lid from closing.
Allow the
DraughtKeg to cool
to the right
temperature. You
can rely on the
temperature
indicator on the
control panel of
your BeerTender
appliance.
Wait 4 hours
before dispensing
beer.
Firmly and quickly
pull the handle
down and forward
as far as it will go.
Advertisement
Chapters
Table of Contents
