Before Using For The First Time - T-Fal KI1605US Manual

Never use scouring pads for cleaning purposes.
To remove the anti-scale filter, remove the kettle from its base and allow it to cool
down.
Never remove the filter when the appliance is filled with hot water.
Never use any de-scaling method other than the one recommended.
All appliances are subject to strict quality control procedures. These include actual
usage tests on randomly selected appliances, which would explain any traces of
use.
This appliance is not designed to be used by children or people without knowledge
or experience with the product, unless they are supervised or given prior instruction
concerning use of the appliance by a person responsible for their safety.
Keep the appliance out of reach of children.
Children should be supervised to ensure that they do not play with the appliance.
Never heat the kettle when it is empty.
Never fill the kettle past the maximum water level mark, nor below the minimum
water level mark. If the kettle is too full, some water may spray out.
Your appliance is designed for residential use only.
T-fal reserves the right to modify the characteristics or components at any time in
the interests of the consumer.

BEFORE USING FOR THE FIRST TIME

1. Remove all of the various packaging, stickers or accessories from both the inside and outside
of the kettle.
2. Adjust the length of the cord by winding it under the base. Wedge the cord into the notch.
(fig 1)
• Throw away the water from the first two/three uses as it may contain dust.
Rinse the kettle and the filter separately.
USE
1 To open the lid, according to the model
• Hinged lid: press if necessary on the locking system and pull backwards.
• Assisted opening lid: press on the locking system and the lid lifts automatically
(fig 3)
• Automatic opening lid: press the button at the top of the handle.
• Removable lid : do not use your kettle without its lid. In case the lid is lost or broken, please
contact your after-sales service center
4
(fig 5.2).
(fig 2)
(fig 4)