Fisher-Price Barbie Grow-With-Me Trike 72668 Instructions Manual page 5

5
Pedal Hub
Pedal Axle
Slot
• Fit two pedal hubs onto the pedal axle tabs. Make sure the
tabs fit into the slot in each pedal hub.
6
Pedal Hubs
Pedal Axle
Hole
• While holding the pedal hubs on the pedal axle, insert the
pedal axle through the hole in the center of the front wheel.
7
• Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.
8
Pedal Hub
Pedal Hub
• Turn the front wheel assembly over.
• Insert a pedal hub onto the top of the pedal axle and into
the hole in the center of the front wheel.
• Insert the remaining pedal hub below the pedal axle and
into the hole in the center of the front wheel.
Assembly
Assembly
Tab
Tab
Pedal Hub
Front Wheel
Pedal Hubs
Pedal Axle
9
• Push the pedal hubs into the center of the front wheel until
they are flush with the surface of the front wheel.
10
• Insert a lock washer into the slot in the pedal. Make sure
the raised tabs on the lock washer are facing the "closed"
or outside end of the pedal.
• Insert the other lock washer into the other pedal.
11
• Place a scrap block of wood under the front wheel assembly.
• Fit a pedal on the pedal axle.
• With the lock washer centered over the pedal axle end, tap
the pedal with a hammer until it is secure.
• Repeat this procedure to attach the other pedal to the other
5
end of the pedal axle.
Pedal Hubs
Lock Washer
Raised Tabs
Slot
Closed (Outside)
End of Pedal
Lock Washer
(Inside)
Pedal
Pedal Axle
Front Wheel Assembly