Fisher-Price Barbie Grow-With-Me Trike 72668 Instructions Manual page 4

1
• Place a scrap block of wood on a flat surface.
• Fit a cap nut into the cap nut assembly tool.
• Place one end of the straight axle into the cap nut.
• Tap the end of the straight axle with a hammer. Make sure
the cap nut is securely attached to the straight axle.
• Remove the cap nut assembly tool from the cap nut.
2
Rear Wheel
Indented Side Down
Straight Axle
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
Assembly
Assembly
Straight Axle
Cap Nut
Cap Nut
Assembly Tool
Hubcap
4
3
Hole
Straight Axle
• Turn the frame upside down.
• Insert the straight axle through the holes in the rear of
the frame.
4
Rear Wheel
Indented Side Up
Straight Axle
Frame
Assembled
Rear Wheel
• Place a scrap block of wood on a flat surface.
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the cap nut assembly tool under the assembled rear
wheel and onto the cap nut.
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear
wheel up to be sure the cap nut is securely attached
to the straight axle.
• Dispose of the cap nut assembly tool properly.
• Set the frame assembly aside.
Frame
Bottom View
Cap Nut
Hubcap
Cap Nut
Assembly Tool
Bottom View
Hole