First Time Setup - Panasonic TC-58GX700C Owner's Manual

First Time Setup

The first time setup screen is displayed only when the
TV is turned on for the first time, after the power cord is
inserted into a wall outlet.
1
Turn the TV on with the POWER
button
(TV)
or
(Remote)
Note
●
Please wait a while to turn the TV on after inserting
the power cord into a AC outlet.
2
Setup the following items
●
Select your language
● Select your viewing environment
● Connect to the Internet
●
Set up the network connection
●
Select your time zone
Tuner
Antenna
Cable
Access
Select
RETURN
Channel Scan
First, please connect cable or antenna.
Start channel scan now ?
If you skip this step, the channel scan could be performed in Menu
Skip Scan
Select
Exit
Confirm
RETURN
select
confirm
●
To return to the previous screen / field
●
To exit channel scan
● If some channels are not tuned correctly, you can try
to tune them by [Channel scan] in (TV Menu).
Congratulations !!
Completed Initial Setup.
Please press [OK] to exit the wizard.
If tuning has failed check the RF cable, and the network
connection, and then follow the on-screen instructions.
Note
●
The TV goes into Standby mode when no operation
is performed. User can choose when the TV should
go into standby mode by selecting available options
in [Auto Sleep] in [Time Setup] (Setup) (Off / 4 / 6 / 8
hours).
● The TV goes into Standby mode when no signal is
received and no operation is performed for
10 minutes if [No signal Power off] in the [Time Setup]
(Setup) is set to [On].
●
To retune all channels
[Channel scan] in (TV Menu)
●
To initialise all settings
[Factory defaults] in (Setup Menu)
Scan
English
19