First Time Auto Setup - Panasonic TX-24GW324 Operating Instructions Manual

First time Auto Setup

When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
●
These steps are not necessary if the setup has been
completed by your local dealer.
●
Please complete connections (p. 11 - 13) and settings
(if necessary) of the connected equipment before
starting Auto Setup. For information about the settings
for the connected equipment, read the manual of the
equipment.
1
Plug the TV into a live mains socket and
turn the power on
●
Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
■
How to use the remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select the language
Select your country
● Depending on the country you select, select your
Region and/or store the PIN code number ("0000"
cannot be stored).
14
English
Auto Setup is now complete and the TV is ready
for viewing.
If tuning has failed check the RF cable and then follow
the on-screen instructions.
Note
● To retune all channels
[Re-install channels] in [Search for channels]
(p. 20)
●
To update the available TV signal mode later
[Automatic channel update] in [Satellite
installation] / [Antenna/cable installation]
(p. 20)
●
To initialise all settings
[Factory settings] in [General settings]