Rowenta ACCESSIM VISION EP8650F0 Instructions For Use Manual page 13

• After peeling, we advise you to wipe over the area
with a moist flannel to remove any dead skin. Dry the
skin thoroughly afterwards.
• Method :
- Press the release button to remove the epilator head.
- Clip the Exfoliator Head to the epilator.
- Set the switch to "1" .
- Start exfoliating with a slow, gentle up and down movement.
When using the Micro-Peeling function for the first time or if your skin is very deli-
cate, we recommend:
1. skin is wet before peeling, use cotton wool or a flannel to do this
2. making slow and gentle rotating movements when using the appliance
3. not to use the appliance more than twice on the same area.
• Replacing the exfoliating band
- Press the release button to remove the Exfoliator Head from the epilator.
- Using the plastic end of the cleaning brush unclip the band as follows:
1. Turn the Exfoliator Head over and hold it in place by gripping the edges bet-
ween your thumb and forefinger.
2. Turn the band so that its groove comes round to the central position.
3. Insert the end of the cleaning brush in the groove and push to eject the
band.
4. Insert the new band by slotting the fins (b) of the exfoliator unit in the
groove of the band and pushing until it clicks!
a
b
GB