Do you have a question about the K-DIAL KR5002 and is the answer not in the manual?
Questions and answers
Phil
February 26, 2025
Can’t manually water
2 comments:
Mr. Anderson
February 26, 2025
To manually water using the K-Rain K-DIAL KR5002, follow these steps:
1. Turn the main dial to ON. 2. Press the ZONE button to select the desired zone. 3. Use the plus (+) and minus (-) buttons to set the watering time (from 1 to 99 minutes). 4. The display will show the current day, time, and selected manual watering duration.
This allows immediate watering outside the pre-set schedule.
This answer is automatically generated
Phil
February 26, 2025
@Mr. Anderson
Phil
February 26, 2025
Won’t manually water
1 comments:
Mr. Anderson
February 26, 2025
Manual watering may not work if the CLOCK, START TIME, WATER DAYS, and RUN TIME have not been set. Additionally, manual watering can only be set for 1 to 99 minutes, and the main dial must be turned to "ON" for manual operation.
Contents Overview Overview Introduction Introduction Main Components The K Dial Tap Timer is made to be used in residential applications Additional Functions with normal household water pressures. Program your desired Specifications watering requirements before installing to your tap. Once set, Setup your K Dial will repeat your programmed watering each week.
Overview Overview Main Components Additional Functions 8. ZONE 1 outlet, 20mm BSP Á The display will return to the clock after 1. 25mm BSP tap nut inlet 2 minutes of keypad or schedule inactivity 2. Display 9. ZONE 2 outlet, 20mm BSP Á...
Setup Setup Battery Installation Clock 1. Install 2× 1.5v AAA 1. To set the system time, turn ® Cycle through 12 hour alkaline batteries into the main dial to CLOCK periods to change AM/PM your K Dial Tap Timer, 5. Press START play to save hours ®...
Scheduling Scheduling Start Time Start Time (continued) ® To disable a START TIME 8. The current settings for the START TIME is the time a next NEXT START [d] will again, hold down plus and minus select zone will start watering display as OFF [e] by default simultaneously.
Scheduling Scheduling Water Days Run Time 3. Press START play to save–the WATER DAYS are the days RUN TIME is the duration for hours will begin flashing [b] in which your K Dial will which each zone will water water at designated START ®...
Operation Operation Automatic Watering Manual Watering ® Manual watering can only For automatic watering, ensure Manual operation is for be set in minutes from 1 the CLOCK, START TIME, watering a zone immediately, minute to a maximum of WATER DAYS and this watering time is different 99 minutes.
2 years from the purchase For support email date of the original product, not 2 years info@k-rain.com.au or from the date of replacement. contact the friendly 11 Walters Drive, Osborne Park WA 6017 Customer Service...
Page 9
This will ensure we have a copy of your purchase and activate an extended warranty. Keep up to date to with relevant product information and special offers available through our newsletter. Scan here, or visit k-rain.com.au/register for more info...
Need help?
Do you have a question about the K-DIAL KR5002 and is the answer not in the manual?
Questions and answers
Can’t manually water
To manually water using the K-Rain K-DIAL KR5002, follow these steps:
1. Turn the main dial to ON.
2. Press the ZONE button to select the desired zone.
3. Use the plus (+) and minus (-) buttons to set the watering time (from 1 to 99 minutes).
4. The display will show the current day, time, and selected manual watering duration.
This allows immediate watering outside the pre-set schedule.
This answer is automatically generated
@Mr. Anderson
Won’t manually water
Manual watering may not work if the CLOCK, START TIME, WATER DAYS, and RUN TIME have not been set. Additionally, manual watering can only be set for 1 to 99 minutes, and the main dial must be turned to "ON" for manual operation.
This answer is automatically generated