Table of Contents
Advertisement
Fault
Rust spots on cutlery.
Detergent residue is present
in the detergent dispenser
or the tablet collecting tray.
Excessive formation of foam
occurs.
Home Connect problem
Fault
Connection to home net-
work is not established.
WLAN display is flashing.
Home Connect cannot be
implemented correctly.
Cause
Cutlery is not sufficiently
rust-resistant. Knife blades
are often more severely af-
fected.
Cutlery may also rust if
washed together with rust-
ing items.
Salt content in washing wa-
ter is too high.
Spray arms were blocked by
tableware so detergent was
not rinsed out.
Detergent dispenser was
damp when detergent was
added.
Hand washing-up liquid is
present in dispenser for
rinse aid.
Rinse aid has been spilled.
Detergent or appliance care
product used causes excess-
ive foaming.
Cause
WLAN on router is not act-
ive.
Connection to home net-
work is not available.
Home Connect set incor-
rectly.
Technical fault is present.
Troubleshooting en
troubleshooting
Use rust-resistant tableware.
▶
Do not wash rusting items.
▶
Remove any spilled special salt
1.
from the tub.
Screw the cap of the special salt
2.
dispenser on tight.
Check that the spray arms are not
▶
blocked and can rotate freely.
Only add detergent to a detergent
▶
dispenser when dry.
Immediately add rinse aid to the
▶
dispenser.
→ "Adding rinse aid", Page 25
Remove the rinse aid with a cloth.
▶
Change the brand of detergent.
▶
troubleshooting
Check the wireless network con-
▶
nection of your router.
Activate the wireless network con-
▶
nection on your router.
Please consult the documents sup-
▶
plied for Home Connect.
Please consult the information
▶
about support in the documents
supplied for Home Connect.
49
Advertisement
Table of Contents
