Baxton Studio BECKER F/T DAYBED Assembly Instruction page 3

STEP 8
Begin with attaching Trundle Side Rail (12) to Front Rail (10)
& Back Rail (11) using 2 Bolts (A) per corner.
Tighten bolts with Allen Key (J) provided.
STEP 10
Attach Trundle Support (14) to Front Rail (10)
& Back Rail (11) using 2 Bolts (C),
2 Spring Washers (D) and 2 Flat
Washer (F) on each end of each
Slat Support (14). Tighten bolts with
Allen Key (I).
TRUNDLE
Please do not tighten the hardware until the entire assembly is completed.
A
12
11
10
12
14
12
3
10
12
STEP 9
Attaching 2 Castors (15) to the bottom of Trundle Support (14)
according to the pre-mark line. Securing with 4 Screws (G)
per each Castor (15) using Phillips screwdriver (NOT PROVIDED).
J
J
I
STEP 11
C
Attach Trundle Slat (13) to Front Rail (10) & Back
Rail (11) using 4 Screws (H) per set.
D
Tighten screws with Phillips screwdriver
F
(NOY INCLUDED)
FULL SET
G
15
14
5
H
13
4
13
4
10
ASSEMBLY
COMPLETE