Blackweb BWA18AA008 Manual

Power ON/OFF Button
Volume Down "-" / Previous Track Button
POWER:
Press and hold the Power button for 2 seconds to turn device ON/OFF.
VOLUME UP " + ":
Short press (< 0.5s) the button to turn up volume. Press and hold the button (2s) to go to
the next track.
VOLUME DOWN " –":
Short press (< 0.5s) the button to turn down volume. Press and hold (2s) the button to go
to the previous track.
INDICATOR LIGHT STATUS:
Power ON – When the speaker is turned on, a solid blue light will appear momentarily.
Bluetooth pairing indicator – When the speaker is turned on, a flashing blue and
red light indicates speaker is ready to pair. Once paired, the light will turn solid blue, then
turn off.
Power OFF – When the speaker is turned off, the indicator light will momentarily turn
solid blue, then turn off.
Battery charging – While speaker is charging, the indicator light will turn solid red.
Once speaker is fully charged, it will turn off.
SPEAKER PAIRING:
To pair the speaker, follow these simple steps:
1. Make sure the smartphone, tablet, or computer you're using with the speaker has
Bluetooth.
2. Turn on the speaker (press and hold the Power button for 2 seconds) and look for the
little blinking light.
3. Look for Blackweb SPRK A008 in your device's Bluetooth list, or click YES.
The device and Bluetooth will find each other every time, so long as the speaker is set to
Bluetooth and your device's Bluetooth is on. If you're connecting to a computer, you may
have some extra steps on that end. You'll have to get that information from the computer
company.
Auto off: If the speaker is on but is not connected to Bluetooth, it will shutdown after 2
minutes. Once paired, if the speaker is paused for 15 minutes or more it will automatically
shutdown.
DISCONNECTING DEVICE:
Long press the BLUETOOTH button up to 2 seconds to disconnect the speaker from the
device and enter into Pairing mode.
SPEAKER CONTROLS & FEATURES
Bluetooth Pairing Button
Play/Pause Button
Volume Up "+" / Next Track Button
PREMIUM BLUETOOTH® SPEAKER
USB Charging Port
(2000mA)
CALL HANDLING:
INCOMING CALL:
Answering and hanging up a call – When speaker is paired to your phone, short
press the PLAY/PAUSE button to answer the call. To hang up, short press the PLAY/PAUSE button.
Move call from speaker to device – If you are on the call and wish to move the call
from the speaker to your device, long press the PLAY/PAUSE button.
Reject an incoming call – To reject an incoming call, long press the PLAY/PAUSE
button for 3 seconds.
Situation
PLAY/PAUSE Button
First incoming call
On call
PAIR 2 FOR PARTY MODE:
1. Turn on both speakers. Press and hold the "+" and "-" buttons on each speaker until the
lights blink red and blue. This may take up to 2 seconds. You will hear a voice prompt
indicating the speakers have entered into Search mode.
2. It will take up to 15 seconds for the speakers to find each other. Once paired, the light
will turn solid blue, and a tone with voice prompt will indicate "Speakers paired." It will
be followed by "Left Channel" and "Right Channel" voice prompts.
3. To unpair 2 speakers, press and hold the "+" and "-" buttons for up to 2 seconds.
AUX-IN MODE:
1. Plug one end of the cord into the speaker and the other into the headphone jack on your device.
2. Turn on the speaker
3. Hit PLAY on your device.
4. You'll have to play and pause the music from your device, not the speaker.
(Note: If you are in Party mode and you use the auxiliary cable, the music will only play from
the device it is hooked up to.)
USB CABLE:
25 cm Micro USB cable.
BWA18AA008
Line In
Short Press Long Press
PLAY/PAUSE Button
Pick up call Reject call
End call Move call from speaker to device