Customizing The Self-Timer; Shooting Using A Tv Monitor - Canon POWERSHOT IXUS100IS User Manual

$ Customizing the Self-Timer

You can set the time delay (0 – 30 seconds) and the number of shots taken
(1 – 10 shots).
What if the number of shots is set to two or more shots?
•
Exposure and white balance settings are set with the first shot.
•
When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp lights).
•
If the flash fires, the shooting interval may be longer.
•
If you set a high number of shots, the shooting interval may be longer.
•
If the memory card becomes full, shooting stops automatically.

Shooting Using a TV Monitor

You can use a TV to display the camera screen content.
•
Connect the camera to a TV as described in "Viewing Images on a TV"
(p. 110).
•
Shooting procedures are the same as when using the camera's monitor.
TV display is not available when using the HDMI Cable HTC-100 (sold
separately) to connect the camera to a high-definition TV.
76
Select $.
After pressing the p button, press the
●
op buttons to select $, then
immediately press the n button.
Select the settings.
Press the op buttons to select [Delay] or
●
[Shots].
Press the qr buttons to select a value,
●
then press the m button.
●
Follow Step 3 in "Ò Using the Self-Timer"
(p. 63) to shoot.