Alarms And Timers; Setting An Alarm; Cancelling A Sounding Alarm; Snoozing A Sounding Alarm - PURE Evoke C-F6 Manual

Alarms and timers

Setting an alarm

Evoke has two alarms which can switch the radio on and tune to a digital or FM radio station, play a CD or
sound an alarm tone.
1
1. Press the button.
2. Turn and press the Select dial to select 'Alarm 1' or 'Alarm 2'.
3. Turn the Select dial to scroll through each alarm setting. If you want to change a setting, press the
Select dial. You can set the following alarm options:
Enable: Turn and press the Select dial to choose when you want the alarm to repeat. The available
options are 'Daily', 'Once', 'Weekends' or 'Weekdays'.
Time: Turn and press the Select dial to adjust the hour of the alarm. Note: If you have set your Evoke
to use the 12 hour time format, make sure that you select the 'AM' or 'PM' version of the hour before
pressing the Select dial. Repeat to set the minutes of the alarm.
Mode: Turn and press the Select dial to choose between 'Buzzer', 'Internet radio', 'DAB', 'FM'
or 'CD'. Note: If you select 'CD' as the alarm source and there is no CD in Evoke when the alarm
sounds, the 'Buzzer' will sound instead.
Preset: If you have set your alarm to tune into an internet, digital or FM radio station, turn and press
the Select dial to choose between the last radio station you were listening to or one of the stations in
your preset list.
Volume: Turn and press the Select dial to set the volume of Evoke when the alarm sounds.
Save: Turn and press the Select dial to save the alarm.
Evoke's display will show the

Cancelling a sounding alarm

To cancel a sounding alarm, press any button except the Select dial. If you press the Standby button
during a sounding alarm, Evoke will enter standby.

Snoozing a sounding alarm

To snooze a sounding alarm, press the Select dial. Evoke's display will show the snooze countdown timer and
the alarm icon ( or
alarm for 5 minutes. To change the default snooze time see page 7.
DAB STATION DETA DAB STATION DETA

Setting the sleep timer

DLS SCROLLING IN DLS SCROLLING IN
Evoke has a sleep timer that switches your Evoke into standby after a set time period. To set the sleep
timer:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Main
menu' and then choose 'Sleep'.
3. Turn the Select dial or use the < > buttons on the remote control to increase the duration of the sleep
timer from 15 to 60 minutes. Press the Select dial or the Select button on the remote control to start the
sleep timer.
Evoke's display will show the sleep icon when the sleep timer is active.
or icon to show that the alarm has been set.
DAB STATION DETA DAB STATION DETA
DLS SCROLLING IN DLS SCROLLING IN
) will flash to show how long the alarm will snooze for. By default, Evoke snoozes an
EN
EN
17