Customizing The Self-Timer - Canon PowerShot IXS 980 IS User Manual

$ Customizing the Self-Timer

You can set the time delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
What if the number of shots is set to more than 2 shots?
•
Exposure and white balance settings are fixed to the first shot.
•
When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp will light).
•
If the flash fires, the shooting interval may take longer.
•
If you set a high number of shots, the shooting interval may take longer.
•
If the memory card becomes full, shooting stops automatically.
Display the [Drive Settings]
screen.
After pressing the p button, immediately
●
press the n button.
Select $.
Press the op buttons or turn the  dial
●
to select [Self-Timer], then use the qr
buttons to select $.
Make the settings.
Press the op buttons, or turn the Â
●
dial to select [Delay] or [Shots].
Press the qr buttons to select a value,
●
then press the m button.
Select the $ in Steps 1 and 2 on p. 61.
●
75