Ae Lock/Exposure Shift - Canon PowerShot IXS 980 IS User Manual

Image Quality Table
Image Quality
(Recording Pixels/Frame Rate)
640 x 480 pixels, 30 frames/sec. This setting will produce standard movies.
320 x 240 pixels, 30 frames/sec.
Estimated Shooting Time
Image Quality
(Frame Rate)
• Based on Canon's testing standards.
• Max. clip length is approx. 1 hour.
Recording also stops when the file size reaches 4 GB.
• Depending on the memory card, recording may stop even if the max. clip length has
not been reached. Use of SD Speed Class 4 or higher memory cards is recommended.

AE Lock/Exposure Shift

In X you can set the exposure, or change it in 1/3 steps within a range of ±2.
Since the number of the recording pixels is
smaller, the image quality will be lower than with
32 MB (Supplied)
22 sec.
1 min. 12 sec.
Focus.
Set the exposure.
Press the o button to lock the exposure,
●
the exposure shift bar appears.
Press the o button again to release the lock.
●
Change the exposure.
While watching the screen, press the qr
●
buttons or turn the  dial to adjust the
brightness.
Shoot.
Changing the Image Quality
Content
, but you can record three times the length.
Shooting Time
2 GB
23 min. 49 sec.
1 hr. 13 min. 10 sec. 4 hrs. 52 min. 24 sec.
8 GB
1 hr. 35 min. 11 sec.
99