RM-291
Phoenix service SW
6. Activate the connection you want to use by clicking it, use up/down arrows to move it on top of the list,
and click Apply.
The connection is now selected and can be used after closing the
Selected connection will be shown on the right hand bottom corner of the screen.
7. To use the selected connection, connect the phone to Phoenix with correct service tools, make sure that
it is switched on and select Scan Product.
When a product is found, Phoenix will load product support. Name of the loaded product support module
and its version information will be shown on the bottom of the screen.
Issue 1
Figure 40 Connections list
Figure 41 Connection information
Figure 42 Scan product
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Nokia Customer Care
Manage Connections window.
Page 3 –27