Brightz Cosmic Instructions

Cosmic Brightz
™
Instructions
Copyright Brightz, Ltd. 2018
©
All rights reserved
Step 1 – Install Batteries
Open latches on the side of the battery pack to access batteries. Install 3 fresh AA batteries,
observing correct polarity (+/-). Close the battery pack, making sure the latches snap shut.
Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable
(nicad, ni-mh, etc.) batteries.
Caution: Batteries may explode or leak, and cause burn injury if recharged, disposed of in fire,
mixed with a different battery type, or inserted backwards. Replace all used batteries at the same
time. Clean battery contacts and contacts on the device prior to installing. Remove batteries if item
will not be used for long periods of time. When battery expires remove promptly.
Step 2 – Select a Location
Choose a location to mount the battery pack, away from moving parts.