Download Print this page

Brightz Wheel Cardz Instructions

Wheel Cardz

by Brightz

™

Instructions

Step 1 – Placement

Select a position on the bike where you want to place

Wheel Cardz™. See diagram for recommended

placement.

Loosen the screw on the clamp to open it. Position the

clamp around the bike frame so that the clip mouth is

facing the wheel spokes and tighten the screw.

Step 2 – Insert Card

Insert any card into the clip, making sure the card is secured in both sets of rubber teeth. Adjust the card

and clamp so that about 1/4" inch of the card is in between the spokes.

Rubber Teeth

Table of Contents

Need help?

Do you have a question about the Wheel Cardz and is the answer not in the manual?

Page 1 Patent Pending • All rights reserved Step 1 – Placement Select a position on the bike where you want to place Wheel Cardz™. See diagram for recommended placement. Loosen the screw on the clamp to open it. Position the clamp around the bike frame so that the clip mouth is facing the wheel spokes and tighten the screw.
Page 2 - Do not operate the product while the bike is being pedaled or any part of the bicycle is in motion. - Do not mount Wheel Cardz™ on any moving part of the bicycle (e.g., gears, pedals, chain, brakes). - This product is designed for use on bicycles only. Improper installation of product will interfere with bicycle operation.