Operation - Sahara CH310T Instruction Manual

ASSEMBLY OF THE HEATER
Before using the heater, the feet (supplied separately in the
carton), must be fitted to the unit. These are to be attached to
the base of the heater using the 4 self-tapping screws provided,
taking care to ensure that they are located correctly in the
bottom ends of the heater side moldings.

OPERATION

NOTE: It is normal when the heaters are turned on for the first time or when they are turned
on after having not been used for a long period of time to emit some smell and fumes. This
will disappear when the heater has been on a short while.
Convector heater with thermostat and fan CH310T
1. Choose a suitable location for the heater, taking into account the safety instructions above.
2. Insert the plug of the heater into a suitable socket.
Heat switch
Fan switch
Thermostat
CH310T
_English_