Advertisement
Available languages
Available languages
Installation and operating instructions
BLUETOOTH THERMOSTAT – SETUP
TECHNICAL SPECIFICATIONS
Bluetooth: Version 4.2
Power supply: 230V - 50Hz
Maximum load: 16A (resistive)
Temperature range: +5°C/+35°C
External Temperature setback: 230V - 50Hz
IP class: IP21
Standard Color: White
Sensors: Built-in room sensor and external floor
sensor NTC or wireless BLE sensor
INSTALLATION
Installation must be done by a qualified elec-
trician in accordance with wiring and building
regulations. Before installation, disconnect any
power to the thermostat's mains.
In a factory new thermostat the front cover (A)
and frame (B) are loose and you can just pull
them out. If the visual parts are fixed then push
the rotary dial (C°) hard downwards and while
holding it down turn anti-clockwise. The front
cover and the frame can now be pulled away
easily.
Connect the wires to the thermostat's terminal:
SETBACK: External Setback Wire (if applica-
ble), HEATING (N): Heating Cable N connec-
tion, N: Power N connection, FLOOR SENSOR:
Floor temp sensor NTC, HEATING (L): Heating
Cable L connection, L: Power L connection.
Next, position the thermostat and fasten it into
the wall mounting box using 2-4 screws. As-
semble the frame. Check that fixing nails are in
'LOCK' position. If not use screwdriver to push
them to correct position. Push the front cover
until it snaps in place. The front cover should
now be firmly fixed on all sides.
STARTUP
After connecting the power to the thermostat
for the first time thermostat recognizes if floor
sensor is connected or not and makes initializa-
tion accordingly (selects between floor mode
and air mode). The following settings are initial-
ized accordingly (floor/air).
Name of thermostat : RANDOM number
Mode : Floor / Air
Floor temperature min : 5°C / NaN
Floor temperature max : 27°C / NaN
Floor temperature offset (calibration) : -3°C
Air temperature min : 5°C
Air temperature max : 28°C
Air temperature offset (calibration) : 0°C
PWM min : 0%
PWM max : 100%
Snow melting ON temperature min : 0°C
Snow melting ON temperature max : 10°C
Snow melting OFF temperature: -25°C
Snow melting air humidity min: 30%
User program activated eco temp : 19°C
Externally activated eco temp : 19°C
Valve protection : OFF
Sensor type : 10k ohm
Display brightness in standby : 70%
Weekly program : OFF
Use ecoControl App to check and modify
settings.
BLUETOOTH THERMOSTAT –
USER MANUAL BASIC USE
The thermostat is controlled by rotary dial (C°)
and a touch button (SET). The basic use of
thermostat is described in picture END USER
FUNCTIONS:
1. Normal mode with dim screen saver display.
Use rotary dial to step into active mode (2).
2. Active mode. Rotating the dial takes you to
modify the set temperature of a current
4
operating state (3).Touching the set button
enters the menu (4).
3. Adjust the temperature set value of the
current state (comfort, eco or externally
activated setback eco). Return to the start by
touching the set button or automatically after a
timeout period.
Notice that in set value page current operating
state is shown under the set temperature digits.
A flash symbol is indicating the relay activity.
4. In menu you can step from function to
function with the rotary dial and then enter the
function by touching the set button:
- touch the set button to select comfort state
and adjust the temperature set value with rotary
dial. Return back to start by touching the set
button.
- select eco mode by touching the set button
and adjust with rotary dial the set point of user
program eco temperature or the setback eco
temperature (if setback input active). Return to
the start by touching the set button.
- display the current heating mode
- switch off the power by touching the set
button. Power is switched on by rotating the
dial.
- display the link to user manuals (QR-code link)
- from EXIT you return to the start by touching
the set button.
ADVANCED USE
User may use a mobile device with ecoControl
App (Android / iOS) to read log temperatures,
to make settings and to define a weekly user
program. App can also generate email reports.
Follow the guides in ecoControl App.
A Thermostat indicates the mobile device
connection with Bluetooth symbol on display.
1
Settings
Thermostat has several settings which can
easily be adjusted by ecoControl App.
Name of thermostat
Name shown in ecoControl App
Heating mode
Thermostat can measure and adjust floor
temperature, air temperature, air temperature
with floor limits (dual), heating ratio (PWM
control) or it can melt snow and ice from stairs
and driveways in snow melting mode.
Floor temperature min and max
This setting has two main purposes. In floor
mode min and max values specify active range
of dial. In dual mode this setting does not effect
the dial but thermostat keeps floor temperature
between limits. Feature can be used to protect
wooden floors (max limit) or to guarantee warm
floor in room with fireplace, e.g. Note: N/A in
PWM and in air mode.
Floor temperature offset (calibration)
If user's temperature measurement has offset
to dial setpoint this setting is used to calibrate.
Note, floor sensor inside floor construction is
much warmer than real temperatures meas-
ured in room. Thus default is -3C to have
rotary dial adjustment range in realistic area
of 18C...24C.
Air temperature min and max
This setting has two main purposes. In air and
dual mode it specifies active dial range. In all
other modes it can be used as air over tempera-
ture protection.
Air temperature offset (calibration)
If user's temperature measurement has offset to
dial setpoint this setting is used to calibrate.
PWM min and max
This setting has two main purposes. In PWM
5
Advertisement
