Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Batteries sold separately.
To ensure security of your safe, Bunker Hill Security
does NOT provide replacement keys.
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
REV 14f
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2013 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Related Manuals for Bunker Hill Security 61565
Summary of Contents for Bunker Hill Security 61565
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Batteries sold separately. To ensure security of your safe, Bunker Hill Security does NOT provide replacement keys. Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com...
-
Page 2: Important Safety Information
4. Use as intended only. Page 2 For technical questions, please call 1-888-866-5797. Item 61565... -
Page 3: Installation Instructions
See Figure A below. around each bolt will expand, and secure each bolt into the concrete to secure the Safe in place. Mounting Holes Figure A: Rear Mounting Hole Locations Item 61565 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Operation
2. Insert Key into the lock and turn clockwise. Then: a. turn the Knob clockwise, b. turn the Handle clockwise, and c. pull the Door open. Keys Manual Lock Cover Handle Figure C: Manual Lock Page 4 For technical questions, please call 1-888-866-5797. Item 61565... -
Page 5: Changing The Code
1. Close the door and turn the Handle counterclockwise. 2. Turn the Knob counterclockwise. 3. Pull on the door to make certain it is properly locked. Knob Handle Figure E: Closing Item 61565 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Maintenance
Be careful not to get any oil or other liquids on or near the electronic mechanism. 5. Occasionally apply a small amount of oil to the wheel axles. 6. Occasionally vacuum or brush dust from the carpet lining of the safe. Page 6 For technical questions, please call 1-888-866-5797. Item 61565... -
Page 7: Replacing The Batteries
Battery Compartment and sliding it into place. Record Serial Number Here: Note: If product has no serial number, record Note: Replacement parts are not available for this item. month and year of purchase instead. Item 61565 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.