Table of Contents
Advertisement
BIOS
•
256Mb Aten BIOS
•
ACPI 3.0 or later, SPI dual/quad speed support, and SMBIOS 2.7 or later
Power Management
•
ACPI power management
•
Power button override mechanism
•
Wake-On-LAN
•
Power-on mode for AC power recovery
•
Intel® Intelligent Power Node Manager 3.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used. See the note on page 20.)
•
Management Engine (ME)
System Health Monitoring
•
Onboard voltage monitoring for +1.8V, +3.3V, +5V, +/-12V, +3.3V standby, +5V standby, HT, memory, chipset temperature,
system temperature, and memory temperature
•
CPU 5-phase switching voltage regulator
•
CPU thermal trip support
•
Status monitor for on/off control
•
CPU Thermal Design Power (TDP) support of up to 145W (See Note 1 on next page.)
Fan Control
•
Five 4-pin fan headers
•
Fan status monitoring via IPMI connections
•
Multi-speed fan control via onboard BMC
System Management
•
Trusted Platform Module (TPM) support
•
PECI (Platform Environment Control Interface) 2.0 support
•
Power supply monitoring
•
SuperDoctor® 5, Watch Dog, Non-maskable interrupt (NMI), RoHS
•
Chassis intrusion header and detection (Note: please connect a cable from the Chassis Intrusion header at JL1 to the
chassis to receive an alert via IPMI.)
LED Indicators
•
CPU/Overheating
•
Power/Suspend-state indicator
•
Fan failure
•
UID/remote UID
•
HDD activity
•
LAN activity
Dimensions
•
12" (L) x 13" (W) (30.48 mm x 33.02 mm)
Motherboard Features
15
Chapter 1: Introduction
Advertisement
Table of Contents
