Connecting Headphones and In-Ear Professional Personal Monitors!
PLEASE PROTECT YOUR EARS! Prolonged use of headphones or
In-Ear personal monitors at high volumes may affect your hearing
capacity or may result in noise induced hearing loss (NHL).
1.
Connect the 1/8" stereo connector end of your headphone or In-Ear
personal monitor into the "Audio Output" jack on the receiver dongle.
2.
Rout the audio cable beneath the belt clip as shown to prevent
accidental disconnection of cable
3.
First turn ON the receiver dongle by pressing and holding the
v
POWER button
F
The Power Status LED on the receiver (Rx) will show Solid Green LEDs
F
The flashing Green LED on the transmitter (Tx) will turn to Solid
Green indicating communications between (Tx) and (Rx) is established.
on the receiver dongle for 2 seconds.
RECEIVER CONNECTION
Audio Output Jack
In-ear Personal Monitors
Audio Cable
v
(Rx)
Wi-AudioLink
Belt Clip
31