Table of Contents
Advertisement
Paring the Wi-AudioLink
Before using the Wi-AudioLink dongles with your instruments, you need to pair the transmitter dongle with the
receiver dongle. Pairing will create connection between the transmitter dongle and receiver dongle.
1.
First turn ON the transmitter (Tx) and the receiver (Rx) dongles by pressing and
holding the POWER button
2.
Press and hold the LINK button
The Power/Status LED on the Transmitter will start flashing. The transmitter
dongle is now in a Pairing mode and ready to search for receivers.
3.
Press and hold the LINK button
The Power/Status LED on the receiver will start flashing. The receiver dongle
is now in a Pairing mode and ready to be found by the transmitter dongle
4.
Once the transmitter dongle pair with receiver dingle, the Power/Status LED
on both devices will turn to solid Green
5.
The Wi-AudioLink transmitter and receiver dongles are now ready for use.
v
k
,
on each of the dongles for 2 seconds.
p
on the transmitter (Tx) dongle for 6 seconds.
z
on the receiver (Rx) dongle for 6 seconds.
Wi-AudioLink
PARING
(Rx)
p
k
(Tx)
z
v
19
Advertisement
Table of Contents
