Table of Contents
Advertisement
Wi-AudioLink
RECEIVER CONNECTION
4.
Turn ON the receiver (Rx) dongles by pressing and holding the
v
POWER button
F
The Power Status LED on the receiver (Rx) will show Solid Green LEDs
F
The flashing Green LED on the transmitter (Tx) will turn to Solid Green indicating
communications between (Tx) and (Rx) is established.
5.
Place the receiver dongle on the amp as shown. Alternatively the
receiver can be placed on the floor next to the foot pedal or stomp box.
6.
Power up your Amp, Mixer, Digital Recorder or Foot pedal are you
are ready to go!
30
on the receiver dongle for 2 seconds.
(Rx)
z
v
Advertisement
Table of Contents
