Specifications - Sony VPL-DS100 Operating Instructions Manual

Hide thumbs Also See for VPL-DS100:
Table of Contents

Advertisement

Specifications

Optical characteristics
Projection system
3 LCD panels, 1 lens, projection
system
LCD panel
Superhigh-aperture 0.62-inch
SVGA panel, 1,440,000 pixels
(480,000 pixels 3)
Lens
1.2 times zoom lens (manual)
f 18.0 to 21.6 mm/F 2.2 to 2.4
Lamp
157 W UHP
Projection picture size
Range: 40 to 150 inches (diagonal
measure)
Light output
ANSI lumen
Throwing distance (When placing on the floor)
When the SVGA signal is input:
40-inch: 1.1 to 1.4 m
(3.6 to 4.6 feet)
60-inch: 1.7 to 2.1 m
(5.6 to 6.9 feet)
80-inch: 2.3 to 2.8 m
(7.5 to 9.2 feet)
100-inch: 2.9 to 3.5 m
(9.5 to 11.5 feet)
120-inch: 3.5 to 4.2 m
(11.5 to 13.8 feet)
150-inch: 4.4 to 5.3 m
(14.4 to 17.4 feet)
There may be a slight difference between the
actual value and the design value shown above.
Electrical characteristics
Color system NTSC
/PAL/SECAM/
3.58
NTSC
4.43
system, switched automatically/
manually
Resolution
600 horizontal TV lines (Video
input)
800
600 dots (RGB input)
Acceptable computer signals
fH: 19 to 72 kHz
fV: 48 to 92 Hz
(Maximum input signal resolution:
XGA 1024
fV: 85 Hz)
........................................................................................................................................................
1) ANSI lumen is a measuring method of American National Standard IT 7.228.
2) Set the resolution and the frequency of the signal of the connected computer within the range of
acceptable preset signals of the projector.
1)
1200 lm
/PAL-M/PAL-N
2)
768
Applicable video signals
15 kHz RGB/Component 50/60
Hz, Progressive Component 50/
60 Hz, DTV (480/60I, 575/50I,
1080/60I, 480/60P, 575/50P,
1080/50I, 720/60P, 720/50P,
540/60P), Composite video, Y/
C video
Speaker
Monaural speaker system, 40 20
mm (1
1 W
Input/Output
Video input
VIDEO: phono type
Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type (male)
Y (luminance): 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst
0.286 Vp-p ±2 dB (NTSC)
(75 ohms terminated),
burst 0.3 Vp-p ±2 dB (PAL)
(75 ohms terminated)
INPUT A
HD D-sub15-pin (female)
Analog RGB/component:
R/R-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative
(75 ohms terminated)
B/B-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
SYNC/HD:
Composite sync input: 1-5 Vp-p
high impedance, positive/
negative
Horizontal sync input: 1-5 Vp-p
high impedance, positive/
negative
VD:
Vertical sync input: 1-5 Vp-p
high impedance, positive/
negative
AUDIO
Stereo minijack
500 mVrms, impedance more
than 47 kilohms
5
13
/
/
inches), max.
8
16
47
Specifications

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vpl ds100 - tft lcd projector 1200 ansi lumens

Table of Contents