Control Panel - Sony VPL-DS100 Operating Instructions Manual

– Flashes when the lamp cover is not
secured firmly.
For details on the LAMP/COVER
indicator, see page 44.
qa Focus ring
Adjusts the picture focus.
qs Zoom ring
Adjusts the picture size.
qd Connector panel
For details, see "Connector Panel" on
page 13.
qf Speaker
qg Security lock
Connects to an optional security cable
(Kensington's).
Web page address:
http://www.kensington.com/

Control Panel

INPUT TILT
1 2 3
1 I / 1 (on/standby) key
Turns on the projector when the
projector is in standby mode. The ON/
STANDBY indicator around the I / 1
key lights in green when the power is
turned on.
When turning off the power, press
the I / 1 key twice following the
message on the screen, or press and
hold the key for about two seconds.
For details on steps for turning off the
power, see "To turn off the power" on
page 27.
2 ON/STANDBY indicator (located
around the I / 1
Lights up or flashes under the following
conditions:
– Lights in red when a AC power cord is
plugged into a wall outlet. Once in
standby mode, you can turn on the
projector with the I / 1 key.
– Lights in green when the power is
turned on.
– Flashes in green while the cooling fan
runs after the power is turned off with
the I / 1 key. The fan runs for about
90 seconds after the power is turned
off.
The ON/STANDBY indicator flashes
quickly for the first 60 seconds.
During this time, you cannot light up
the ON/STANDBY indicator with the
I / 1 key.
For details on the LAMP/COVER and
the TEMP/FAN indicators, see on
page 44.
Location and Function of Controls
PUSH
MENU
ENTER
4 5 6 7
key
)
11