Table of Contents
Advertisement
6 RECLINER OPERATION
6.4
Removing and Installing Fixed Height Armrest
WARNING
Make sure the armrest is securely locked before using the wheelchair.
Removing Armrest
1.
Push down on armrest to ensure it is fully seated in front and rear
sockets.
This step is needed to prevent the release buttons
from hanging up on the sockets.
2.
Unlock the rear armrest by rotating the armrest release lever
towards the outside of the wheelchair.
3.
Press IN the armrest release buttons at the front of the armrest.
4.
While pressing in the armrest release button, remove the armrest
from the arm sockets by pulling straight up.
Installing Armrest
Rear armrest release lever MUST be in the
unlocked position when installing the armrest.
1.
Position the armrest just above the front and rear arm sockets.
2.
Push arm down evenly at the front and rear until the front armrest
release button snaps into the front arm socket.
3.
Lock rear armrest by turning the armrest release lever towards the
back of the wheelchair.
4.
Ensure armrest is locked securely in the arm sockets by gently lifting
up. If not locked, repeat STEPS 1-3.
Invacare® Tracer® SX5 Wheelchair
Armrest
Release Lever
Arm
Socket
FIGURE 4
Removing and Installing Fixed Height Armrest
48
Armrest
Armrest Release
Button
Arm Socket
Part No. 1110550
Advertisement
Table of Contents
