Table of Contents
Advertisement
Virtual Technician Settings
Virtual Technician Settings
Selecting and adjusting the desired setting
After entering the Virtual Technician menu:
Press the or buttons to move the selection cursor over the
desired setting.
Press the or buttons to adjust the selected setting.
Showing the Virtual Technician Help screen
Press the
FUNCTION button (HELP).
A brief explanation about the currently selected Virtual
Technician parameter will be shown in the LCD display.
Press the or buttons to scroll through the explanation if
necessary.
Press the
FUNCTION button (BACK) to return to the Virtual
Technician menu.
Storing the Virtual Technician setting to the selected sound
After adjusting a Virtual Technician parameter:
Press the
FUNCTION button (STORE).
The adjusted Virtual Technician parameter setting will be used
as the default setting for the currently selected sound, and a
confirmation message will briefly be shown in the LCD display.
About Stored Virtual Technician settings
As mentioned above, the Virtual Technician settings are adjusted and stored independently for each sound. This allows different
Virtual Technician adjustments to be made for each piano voice. For example, it may be desirable to voice the SK Concert Grand
piano a little brighter than the EX Concert Grand piano, or increase the Damper, String, and Cabinet Resonances of the Studio Grand
sound while leaving the Mellow Grand sound unchanged.
84
buttons:
Adjust selected setting.
buttons:
Move selection cursor.
* To reset the current Virtual Technician setting to the default value,
press the and buttons simultaneously.
* Virtual Technician settings are adjusted and stored independently for
each sound variation.
* Only values for the currently selected Virtual Technician setting will
be stored. In order to store all of the Virtual Technician settings
simultaneously, it is recommended to use a Registration memory
(page 35) or the Startup Setting function (page 79).
Advertisement
Table of Contents
