Entering the Reverb settings menu
Press and hold the REVERB button.
The Reverb settings menu will be shown in the LCD display.
Adjusting Reverb settings
After entering the Reverb settings menu:
Press the or buttons to move the selection cursor over the
desired setting.
Press the or buttons to adjust the selected setting.
* To reset the current setting to the default value, press the and
buttons simultaneously.
Exiting the Reverb settings menu
Press the
FUNCTION button (EXIT) to exit the Reverb settings
menu.
* Reverb settings are independent for each sound variation.
* Any changes made to the reverb type, settings, or on/off status will
remain until the power is turned off.
* Preferred reverb settings can be stored to a Registration memory for
convenient recall, or to the Startup Setting memory for automatic
selection when the instrument is turned on. Please refer to pages
35 and 79 for more information.
buttons:
Adjust selected setting.
buttons:
Move selection cursor.
27