Setting Up Your Tv ("Initial Setup") - Sony KV-SW292M91K Operating Instructions Manual

x Setting up your TV
("Initial Setup")
When you turn on your TV for the first time, the "Начальная настройкa" ("Initial
Setup") menu will appear. You may change the menu language, preset the TV
channels automatically, sort or edit the channels and adjust the picture position using
the buttons on the remote control or TV front panel.
1
Press V or v to select the desired menu
language, then press
The selected menu language appears.
2
Press V or v to select "Yes", then press
to preset the channels automatically.
The screen will indicate automatic
presetting is in progress.
After all available channels have been tuned
and stored, the "Program Sorting/Edit"
menu appears automatically on the screen.
To skip automatic channel presetting, select
"No", then press
If the message "No channel found. Please
connect cable/antenna" appears, check your
TV connections, then press
3
The "Program Sorting/Edit" menu enables
you to sort and edit the channels.
a) If you wish to keep the channels in the current
condition, press WEGA GATE to exit.
b) Press V or v to select the program
number with the channel you wish to
change. The selected channel will appear
on the screen.
c) If you wish to store the channels in a
different order:
1) Press b to enter sorting mode.
2) Press V or v to select the new program
number position for your selected channel,
then press B.
6
Installation
.
.
.
Select End
Confirm
Select Confirm End
Program:
01
TV System: Auto
VHF Low
End
Program Sorting/Edit
PROG Label Skip
01 Off
02
Off
03
Off
04
Off
Sorting: Edit:
Confirm Exit
Select
Program Sorting/Edit
PROG Label Skip
01
Off
02
Off
03 01 Off
04
Off
Sorting mode
Select Confirm Exit